The provision of safe and trouble-free operation of machinery of hazardous production facilities, which significantly influences the technical and economic indexes of production and the occurrence of technogenic incidents, is inextricably connected with the control of machinery performance in real-time.
Today on the majority of enterprises the performance management of repair service as well as its subsidiaries is carried out in two ways. On the one hand, it is carried out by the checking the expenses compliance to the nomenclature and the costs of the approved budget items; on the other hand – by the calculation of the numbers of accidents and incidents caused by skipping of machinery failures and determining the situational losses of machinery or the shutdown.
However, the leading enterprises have already passed on to the observation of the interaction of the production system elements by the introduction of the real-time monitoring system COMPACS®. All this allows to influence the factors of the result achievement, which is, in fact, the essence of the management department of any organization. Through the monitoring of machinery condition it is possible to identify not only the quality of the main and auxiliary personnel, but also the amount of work performed. In this regard, in order to save the resources and reduce the expenses of manufacturing complex it is possible to remove the operating and repair personnel from the complex and transfer them to the separate organization departments. The objective and timely information about the status of the machinery service acts as a link integrating these departments into a common production system.
Kostyukov V.N., Kostyukov A.V., Gavrin S.V., Kozlov A.A., Yatsyuk N.V. The development of the machinery diagnostic systems // World of oil products. The Oil Companies’ Bulletin – 2012. – № 8. – pp. 43-46
Download the publication
You can order the translation by e-mail: firstname.lastname@example.org