DYNAMICS SPC produces systems for vibration analysis and monitoring of accident prevention and condition control - COMPACS®, which are applied in upstream, downstream, power industry and various engineering industries.
The systems are designed for measuring the vibration parameters, rotation frequency, A/C and D/C, temperature, level, pressure, and the most important value is vibration.
The main task of the vibration channel tuning is to determine the coefficients of frequency and amplitude range. That can be done manually by connecting to a channel of the sensor mounted at the test vibration unit, as well as by calculating coefficients separately for each channel.
The general idea of the process automation is in replacing the test vibration unit by the controlled signal generator which output is connected to the measuring channels instead of a vibration sensor.
The signal generator is included into a test bench, which is a multi-functional software-and-hardware complex operating on the basis of various text signals reproduction and registration of the system’s readings.
Using of test vibration unit is necessary only for the bench calibration, while the system’s tuning is automatic and does not require any calibrating device.
Kostyukov V.N., Kostyukov Al.V., Boychenko S.N., Pavlenkov D.V. Automatic Tuning of Vibration Analysis System Channels by Vibration Parameters // Devices and techniques for measuring, quality control and diagnostics in industry and transport: refer to. 2nd All-Russian scientific and technology conference with international participation. - Omsk: OSTU, 2013. - P. 352-356 Download the publication
You can order the translation by e-mail: a@dynamics.ru
|