Vibration calibrator 8001
Vibration calibrator 8001 is designed for calibration of vibration-measuring devices and transducers in laboratories and on-site. The vibration calibrator is indispensable in commissioning works of stationary vibration measuring systems with a large quantity of vibration sensors. It is suitable for a fast calibration of vibration-survey equipment in field and shop conditions, since it has weight of 1,9 kg and an accumulator continuous work is about 5 hours.
Vibration calibrator 8001 complies with requirements of GOST R 51330.0, GOST R 51330.10 and is intended for operation in explosive zones, where explosive mixtures of IIA, IIB categories and Т1÷Т5 temperature classes can be generated. Its explosion protection rate is lExibIIBT5.
Vibration calibrator 8001 advantages
- digital control and regulation system;
- useful load of up to 200 g;
- small size;
- easy to work;
- universal fastening of the vibration sensor;
- possibility of switching off at any moment of operation cycle;
- switching off by timer;
- switching off when supply voltage drops below tolerable level.
Vibration calibrator 8001 is registered in the State Register of Instrumentation under No 37197-08 (Certificate of instrumentation type approval RU.C.28.004.А No 30796).
The warranty for supplied equipment - 12 months.
Specifications |
Operation frequency, Hz
Vibration acceleration, m/sec2
Velocity, mm/sec
Vibration displacement, μm
Time for reaching operation mode, sec
Duration of operation cycle, s*
Time of continuous operation, using battery, h
Non-linear distortions, %
at load mass from 0 to 50 g
at load mass above 50 to 200 g Maximal load, g
Dimensions, mm:
diameter
height Weight, kg
Operation conditions: temperature, °С |
159,2±0,2
10±0,3
10±0,35
10±0,4
4
90±3
5
≤5
≤3
200
70
228
1,9
-20...+60 |
* Specifications can be changed on the Customer’s request
Specifications can be changed without prior notification
|