Chairman of the Board of Directors of DYNAMICS SPC Vladimir Kostyukov has received an "Outstanding manager" national award
Within the All-Russia "National Unity" public program in the State Kremlin Palace the ceremony of awarding the winners of the "Outstanding manager" National Award took place on December 7, 2015.
"National Unity" is a public program that allows with the participation of entrepreneurs, experts of industry economics, well-known political figures, and outstanding members of the public to develop an objective evaluation system of modern leader achievements in modern Russia.
The selection of nominees for the " Outstanding manager " Annual Award was carried out on the basis of the business activity index, calculated by the Federal State Statistics Service, as well as analytical research on materials of leading business associations (RSPP, the Russian Chamber of Commerce, Business Russia), the rating agencies, and other public sources.
Organizing Committee of the All-Russian "National Unity" public program decided to award the "Outstanding manager " prize to the Chairman of the Board of Directors of DYNAMICS SPC, research advisor - chief designer, Professor Vladimir Nikolaevich Kostyukov for high professionalism, impeccable reputation, qualified enterprise management, good corporate management policies for contribution to the development of the industry, for promotion of Russian market of advanced technologies and services, as well as for the development and implementation of social programs at the regional level.
DYNAMICS SPC took part in the V workshop "Risk evaluation and management in industrial safety. "Risk monitoring of complex and unique facilities"
On the 2-3 of December, 2015 in Moscow V workshop "Risk evaluation and management in industrial safety. "Risk monitoring of complex and unique facilities" was held due to the decision of Scientific and Industrial Union "Risks Management, Industrial Safety, Control and Monitoring" (SIU RISKOM). Leading specialists in the field of industrial risks, technical diagnostics, non-destructive testing and industrial safety expertise took part in the workshop.
The open ceremony began with a welcome speech by N.A.Mahutov, President of RISKOM, Doc.Tech.Sci, corresponding member of RAS.
In 2 days 14 presentations devoted to risk evaluation of various facilities were made.
The conference and general meeting of the SIU "RISCOM" was attended by representatives of DYNAMICS SPC: Chairman of the Board of Directors, Scientific Adviser - Chief Designer, Dr. Tech. Sci., Professor V.N. Kostyukov and Chief Expert of the Department of Marketing and Sales, Dr. Tech. Sci., Professor A.P. Naumenko.
DYNAMICS SPC presented a report "Risk evaluation taking into account the skipping of failure due to the human factor", which addresses the issue of quantitative evaluation of probability of skipping the dangerous condition of machinery by a condition monitoring system for hazardous industries machinery.
DYNAMICS SPC has won the regional stage of "100 best goods of Russia" in 2015
The awarding ceremony of "100 best goods of Russia-2015" award was held 26 of November, 2015 in Omsk Administration conference-hall.
An award for "Industrial and technology products" went to DYNAMICS SPC’s products:
Stationary condition monitoring system for static equipment COMPACS®-AE, designed for continuous monitoring and assessment of hazardous production facilities’ condition, in particular: coke drums, reactors, pump lines, and other static equipment without putting them out of operation. The monitoring is carried out according to the vibration parameters, acoustic emission (AE), temperature, pressure, strain-stress state and other parameters, detecting crack emission and disturbances in technological process.
Personal system for automatic vibration analysis Compacs®-micro™, which is a tool for an efficient diagnostics of machinery and one- two- or three-side dynamic balancing of machines on site. The system provides automatic condition diagnostics of machinery and mechanism assemblies based on the system’s expert messages by the analysis of signals (spectra, envelope, cepstra, etc.).
The new development of DYNAMICS SPC is a system for automatic vibration diagnostics and monitoring of machinery COMPACS®-Lite, designed for safe ecologically-friendly resource-saving operation of explosive production equipment, prevention of accidents and production problems, and managing the equipment condition through its continuous computer monitoring. The system provides continuous monitoring of the parameters of physical processes and automatic determination of the equipment condition parameters, without human intervention..
Member of the Board of Directors of DYNAMICS SPC Alexander Yakovlevich Meling was awarded with the honorary "Excellence in Quality" medal.
The contest, which was held for 18th time has long ago became a symbol of Russian customer’s trust and appreciation of expert society. The goods labeled "100 best goods of Russia" - is a guarantee of safety, reliability and comfort. Omsk region is traditionally ahead Siberian regions in the number of winners’ diplomas. The title of the winner of this year was granted to 27 goods and services in Omsk.
The COMPACS®-AE system
is a contest laureate
system is a contest laureate
The COMPACS®-Lite system
is a contest diploma winner
DYNAMICS SPC took part in the Technical Committee 183 meeting "Vibration, shock and condition control" in St. Petersburg
The meeting of the Technical Committee for Standardization of Federal Agency for Technical Regulation and Metrology TC 183 "Vibration, shock, and technical condition control" held on October 30, 2015 in the conference hall of the International Department of the FBU "Test - St. Petersburg". The meeting was attended by representatives of JSC "Research-and-development center of engineering systems" (JSC "RDC CD") (Nizhny Novgorod), FBU "State Regional Center of Standardization, Metrology and Testing in Saint-Petersburg and Leningrad region" (FBU "Test-St.-Petersburg"), JSC "Scientific-Research Institute of electronic devices" (JSC "NIIEP") (Novosibirsk), and others.
The meeting discussed the draft standards, the development of which ends in 2015:
2.0.183-1.001.14 Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 1: Requirements for assessment bodies and the assessment process (introduction of ISO 18436-1:2012; instead of GOST R ISO 18436-1–2005);
2.0.183-1.002.14 Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 2: Vibration condition monitoring and diagnostics (introduction of ISO 18436-2:2014; instead of GOST R ISO 18436-2–2005);
2.0.183-1.003.14 3. 2.0.183-1.003.14 Mechanical vibration and shock -- Mechanical impedance of the human hand-arm system at the driving point (introduction of ISO 10068:2012);
2.0.183-1.004.14 Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 8: Ultrasound (introduction of ISO 18436-8:2013);
2.0.183-1.005.14 Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 3: Requirements for training bodies and the training process (introduction of ISO 18436-3:2012; instead of GOST R ISO 18436-3–2011);
2.0.183-1.006.14 Mechanical vibration -- Methodology for selecting appropriate machinery vibration standards (introduction of ISO/TR 19201:2013);
2.0.183-1.007.14 Condition monitoring and diagnostics of machines -- Acoustic emission (introduction of ISO 22096:2007);
2.0.183-1.008.14 Condition monitoring and diagnostics of machines -- Data interpretation and diagnostics techniques -- Part 1: General guidelines (introduction of ISO 13379-1:2012, instead of GOST R ISO 13379-2009);
2.0.183-1.010.14 Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 3: Communication (introduction of ISO 13374-3:2012);
2.0.183-1.011.14 Condition monitoring and diagnostics of machines -- General guidelines (introduction of ISO 17359:2011, instead of GOST R ISO 17359-2009);
2.0.183-1.014.14 Condition monitoring and diagnostics of machines -- Ultrasound -- Part 1: General guidelines (introduction of ISO 29821-1:2011);
2.0.183-1.015.14 Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests (introduction of IEC 60068-3-8:2003);
2.0.183-2.009.14 Mechanical vibration and shock -- Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system (introduction of ISO/TS 15694:2004);
2.0.183-2.012.14 Condition monitoring and diagnostics of machine systems -- Electrical signature analysis of three-phase induction motors (introduction of ISO 20958:2013);
2.0.183-2.013.14 Mechanical vibration. Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery (introduction of CEN/TR 15350:2013; instead of GOST R ISO 31417-2010).
After being discussed, the standards were advised for adoption.
DYNAMICS SPC took part in the International Exhibition of High Technologies and Equipment for the Arctic, Siberia and the Far East (VTTA-Omsk-2015)
The exhibition took place on 7-8 October, 2015 in Omsk Regional Exhibition Center.
The following products were presented at the exhibition booth of DYNAMICS SPC:
The Compacs®-micro personal system for automatic vibration analysis is designed for prompt diagnostics of machinery and dynamic balancing of units on site.
Calibrator 8003 designed for testing and calibration of systems and tools for vibration, voltage, and AC/DC measurement, as well as temperature measurement with a THK-L termocouple.
Vibration calibrator 8001 designed for calibration of vibration-measuring devices both in laboratory and production conditions.
DYNAMICS SPC exhibition booth was visited by a large number of specialists and company heads from Omsk and other cities and countries. The booth decorations and exhibits were rated highly by the authorized representative of Russia President in Siberian Federal District N.E. Rogozhkin, Omskaya oblast governor V.I. Nazarov and other honorable guests of VTTA-Omsk-2015.
DYNAMICS SPC has received the "ESQR's Quality Achievements Awards" in recognition of excellent results in the field of quality.
The "ESQR's Quality Achievements Awards" International Convention was carried out on the 14th of June, 2015 in London (UK). During the convention, companies, organizations and government agencies from Europe, Asia, North and South America, Africa and Australia have received "ESQR's Quality Achievements Awards" in recognition of their excellent results in terms of quality.
Well-known business leaders from various countries, academic experts and specialists in the field of quality took part in the convention. This event gathered together the best professionals and companies, organizations and government agencies in the field of quality. European Society for Quality Research - ESQR awarded them in presence of the international business community.
ESQR helps spreading culture of quality and its continuous improvement through the annual conventions and awards ceremonies, which serves as a global forum for the improvement of quality management strategies.
DYNAMICS SPC demonstrated its devotion and efforts to improve the achievements in the field of quality management and it was selected by ESQR for the award-winning. The Director General of DYNAMICS SPC, member of REA, Doctor of Technical Science, Professor, Russian Federation Government Award-winner, Vladimir Kostyukov took part in the ceremony.
DYNAMICS SPC took part in planting of the Birch Grove of Russian Heroes in honor of the Soviet Union Hero-participants of the Great Patriotic War
On the 10th of June at Victory Park on Poklonnaya Hill in Moscow a patriotic event - the Flag Parade and planting birch grove of Russian Heroes was carried out. The largest flag of Russia (2,100 square meters) was deployed. Together with the Russian flag, flags of all countries - participants of the Victory Parade which took place on the Red Square in honor of the 70th anniversary of the Great Victory (on the 9th of May), flags of regions, cities and socially responsible companies of Russia were deployed. After the ceremony in Victory Park All-Russian ecological and patriotic action – planting of the Birch Grove of Russian Heroes took place.
The events were devoted to the 70th anniversary of Victory in the Great Patriotic War and initiated by the International environmental social movement "Living Planet"s project "Arctic-2015".
"Russian Flag and the Banner of Victory are symbols which indicate that our fathers and grandfathers have done everything to make a living planet alive", - said the chairman of the State Duma Committee on Natural Resources, Environment and Ecology, Vladimir Ivanovich Kashin.
To plant trees in the Birch Grove of Russian Heroes, official representatives of Armenia, Serbia, Belarus, Cyprus, Bosnia and Herzegovina, the Czech Republic, Palestine, Mongolia, Kyrgyzstan, Venezuela and other countries-participants of the Victory Parade, which was held on Red Square on the 9th of May, gathered at Poklonnaya Hill. The representatives of the Russian state structures, public organizations and educational institutions also took part in the Grove planting.
Omsk was represented by the Chef of Moscow office of DYNAMICS SPC - Selifanov Igor Vasilyevich.
In the first encyclopedia of The Russian Academy of Engineering the article on the director general of DYNAMICS SPC – Vladimir Kostyukov – has been published
Russian public organization – the Russian Academy of Engineering (RAE) is a legal successor the Engineering Academy of the USSR which was established by 20 ministries and agencies of USSR and RSFSR, 13 of May, 1990.
In 2015 the Russian Academy of Engineering is 25. Due to that, an anniversary informative-reference work "The encyclopedia of the Russian Academy of Engineering" containing articles on the members and partners of the Academy was created.
The article on the director general of DYNAMICS SPC - a corresponded member of RAE, doctor of technical sciences, professor, Russian Federation Government Award-winner - Vladimir Kostyukov was published there as well.
DYNAMICS SPC production was presented at the Siberian Industrial-innovative forum - PROMTECHEXPO-2015
The forum was held in Omsk, 17-19 of March, 2015 supported by Russian Union of Industrialists and Entrepreneurs, International Association Siberian Accord, Chamber of Commerce and Industry of the Russian Federation and Non-profit Partnership "Siberian Machine Building".
PROMTECHEXPO-2015 is devoted to showing the abilities of Russian industry in import substitution conditions. In the exhibition took part not only Omsk companies, but companies from Moscow, Saint-Petersburg, Novosibirsk, Kurgan, Kemerovo, Tomsk, Byisk, Cheboksary, Ekaterinburg, Kirovograd, and others. Also, delegates from France, Belorussia and Khazahstan industrial companies visited the event.
The COMPACS® system is one and only system in the world, which uses all known methods of non-destructive testing. Particularly, for the diagnostics of machinery (dynamic, rotary) equipment the COMPACS® system uses vibration, current and temperature parameters. Static equipment is controlled by the system by means of acoustic-emission and parametrical methods of non-destruction testing. The main advantage of the system is that it is not only measures and visualize the measured parameters but automatically analyses them issuing the results to the personnel in the form of prescriptions for concrete actions aimed at normalizing the equipment condition.